Elexant 4010i Heat Trace Controller
Hovra för att förstora bilden eller klicka för att förstora
Elexant 4010i Heat Trace Controller
nVent RAYCHEM Elexant 4010i Series is a range of compact, full-featured, touch screen based, single-point heat-tracing controllers, with ground fault protection. It provides control and monitoring for both freeze protection and process temperature maintenance. Available with either an electromechanical relay (EMR) for use in non hazardous areas, or solid-state relay (SSR) for use in non hazardous and Class I Div. 2 / Zone 2 hazardous locations. Capable of controlling up to 32A at 277 Vac.
Thanks for your submission. A customer service agent will be in touch soon to help you further.
Information
Resurser
Video
Relaterade produkter
![Placeholder image]()
![Placeholder image]()
![Placeholder image]()
Design
- Global approvals for CID2/Zone 2, ATEX Zone 2, IEC Ex Zone 2
- Ready to install: no need for custom panel design or field assembly
- Flexible control options: up to three directly- connected temperature sensors; also supports 4-20 mA inputs, allowing the use of external temperature sensor converters with thermocouples or other sensor types; also line sensing, ambient sensing, proportional ambient sensing control (PASC) and power limiting modes.
- Flexible monitoring options: ground fault, temperature, current and voltage to ensure system integrity
- Multiple communication ports: RS485 and Ethernet, readily connected to a distributed control system (DCS); support both the Modbus RTU and Modbus/TCP protocols; can network to a host PC running Windows®-based nVent RAYCHEM Supervisor software for central programming, status review, and alarm annunciation
- Reliable during long life: 10 year product warranty available
- Soft-Start, ground fault trip and high/low temperature limit features for equipment protection
- Multiple communication ports: RS485 and Ethernet, readily connected to a distributed control system (DCS)
- Support both the Modbus RTU and Modbus/TCP protocols
- Automatic network configuration with DHCP, or static IP configuration
- Firmware updates using USB thumb drive
- Multi-language interface: English, French, German, Spanish, Russian
- Two multi-purpose digital inputs for connection to external dry (voltage free) contact or DC voltage
Specifikationer
| Aktuellt larm | 0.1 – 100 A |
| Autocykel | 1 – 750 h |
| NEMA-klassificering | 4X |
| Jordfelslarm | 10 – 500 mA |
| Ethernet | 10/100 bas-T. |
| Max ingångsledningsstorlek för strömförsörjning | 16.8 mm² |
| Max värmekabel utgång trådstorlek | 16.8 mm² |
| Styr max. ström | 32 A vid 40 C, nedgraderas till 24 A vid 50 C och ytterligare nedgraderas till 16 A vid 60 C. |
| Max. jordkabelstorlek | 33 mm² |
| Spänningslarm | 80 – 300 V |
| Kontroll av maxspänning | 277 V AC nominellt, 50 Hz |
| Max. jordkabelstorlek | #2 |
| Max ingångsledningsstorlek för strömförsörjning | #5 |
| Max värmekabel utgång trådstorlek | #5 |
| Temperaturkontrollområde | −200 to 700 °C |
| Temperaturlarm | −200 to 700 °C |
| Temperaturkontrollområde | −328 to 1292 °F |
| Temperaturlarm | −328 to 1292 °F |
| Drifttemperatur | −40 to 140 °F |
| Drifttemperatur | −40 to 60 °C |
| Relativ luftfuktighet | 0 % till 90 %, icke kondenserande |
| Kommunikation | RS-485; Ethernet |
| Kommunikationsprotokoll | Modbus/TCP; Modbus RTU |
| RS-485 kabeltyp | En 2-tråds, skärmad partvinnad |
Installationshandbok/instruktionsblad
Electric Heat Tracing
- Varning
- nVent produkter ska installeras och användas endast så som anges i nVents bruksanvisning och utbildningsmaterial. Bruksanvisningar är tillgängliga på www.nvent.com och från din nVent kundtjänstrepresentant. Felaktig installation, missbruk, felapplicering eller annan brist i att helt följa nVents instruktioner och varningar kan orsaka att produkten brister, egendomsskador, allvarliga kroppsskador och dödsfall och/eller ogiltigförklara din garanti.