EuropacPRO Mounting Plate for Use With Cover Plate, 28 HP, 220 mm Board Length
EuropacPRO Mounting Plate for Use With Cover Plate, 28 HP, 220 mm Board Length
Katalog#: 34563-009
Mounting plate for use with cover plates for installation and fixing of heavy components. Full width mounting plates (as wide as the subrack or the system case) are fixed to the side panels. The partial width mounting plates are fixed to the side panel and horizontal rail by means of an assembly strip.
Guide rails Type 4,4” and type strengthened cannot be used in combination with a mounting plate. Top / bottom cover which will be inserted into the groove of the light (type L) horizontal rails cannot be used in combination with a mounting plate.
Information
Resurser
Relaterade tillbehör
![Mounting Plate Assembly Kit for Chassis]()
Ytterligare produktinformation
Design
- For installation and fixing of heavy components
- Mounting plate, full width: The mounting plate is as wide as the subrack/system case and is fixed to the side panels
- A guide rail can be fitted in first and last slot position
- In addition to the mounting plate EMC cover plates can also be fitted to the subrack
- Guide rails type 4.4 and "strengthened" cannot be used
Specifikationer
Produktattribut
Ytterligare produktinformation
Item(s) Delivered
Delivery of this product includes the following item(s):
| Item | Beskrivning | Antal | |
|---|---|---|---|
| 1 | Mounting plate, Al, 1.5 mm | 1 |
- Varning
- nVent produkter ska installeras och användas endast så som anges i nVents bruksanvisning och utbildningsmaterial. Bruksanvisningar är tillgängliga på www.nvent.com och från din nVent kundtjänstrepresentant. Felaktig installation, missbruk, felapplicering eller annan brist i att helt följa nVents instruktioner och varningar kan orsaka att produkten brister, egendomsskador, allvarliga kroppsskador och dödsfall och/eller ogiltigförklara din garanti.