Ventilated Front/Rear Plinths, PV, 100x798x62mm, Zinc Plated, Mild Steel

Feature: Painted steel plinth with front and rear ventilated removable panels for mild steel floor standing enclosures.

Advantage: The plinth is mounted underneath the enclosure to provide extra space between the installation floor and the enclosure's bottom plates, this space is accessible by removing the front or rear panel. The ventilation louvres pre-machined into the panels allow natural ventilation

Benefit: Installing cables into the enclosure can be done easily as the plinth creates extra space below the enclosure. This extra space allows the installer to route the cables through the plinths for bayed enclosures. The plinth allows enclosures to be fixed to the floor without the need for interior access. The ventilation louvres allows air to enter into the bottom of the enclosure.

Comment: The front and rear plinth PV, must be mounted along with side panels PS. If creating an enclosure system with multiple enclosures then the side panels are required to be mounted at the beginning and end only. To reinforce the combined plinths, plinth combining profiles PCP/PCPK, should be used.