TTSIM-2 Sensor Interface Module
将鼠标悬停以放大图片或点击以放大
TTSIM-2 Sensor Interface Module
nVent RAYCHEM TraceTek TTSIM-2 is a sensor interface module with capacity to monitor up to 150m (500ft) of sensor cable. Leak alarm signaling is via 3-digit leak location on built-in LCD display, LED, dry contact relay, and serial data to a PLC or host system using standard protocols. It can be used as a stand-alone leak detection alarm unit, or in networks with other TTSIM, TT-NRM, TTDM-128, or TT-TS12 modules. Available in 24, 120 or 230 Vac 50/60 Hz or 12 or 24 Vdc.
Thanks for your submission. A customer service agent will be in touch soon to help you further.
详情
资源
功能
- Easy to install (DIN rail mounted), simple to set up and operate
- Enclosures available for stand-alone indoor or outdoor installations
- Leak location display on LCD
- LEDs indicate power, leak, cable trouble and communication status
- Volt-free contacts for alarm signaling
- Simple twisted pair serial RS-485 communications up to 1200m (4000ft) with automatic protocol selection (MODBUS, Opto 22 and Metasys)
技术参数
| 深度 | 2.28 in |
| 宽度 | 2.76 in |
| 高度 | 3.39 in |
| 工作温度 | 32 – 122 °F |
| 深度 | 58 mm |
| 宽度 | 70 mm |
| 高度 | 86 mm |
| 工作温度 | 0 – 50 °C |
| 显示屏 | LCD |
| 继电器触点 | SPDT，C 型 |
- 警告
- 应仅根据 nVent 的产品说明书与培训材料安装并使用 nVent 的产品。可访问 www.nvent.com 获取说明书，或者向您的 nVent 客服代表索取。错误安装、使用不当、滥用或未能完全遵守 nVent 的说明与警告，可能会造成产品故障、财产损失、严重的人身伤害及死亡和/或使得保修服务无效。