nVent ERICO Quickfill No-Mix Ground Enhancing Backfill
将鼠标悬停以放大图片或点击以放大
nVent ERICO Quickfill No-Mix Ground Enhancing Backfill
nVent ERICO Quickfill is a no-mix ground-enhancing backfill that reduces resistance to ground and enables convenient installations. Quickfill is designed to minimize dust and eliminate mixing. It is the ideal material to use in areas of poor conductivity such as rocky ground, mountain tops, and sandy soil. Once installed, Quickfill is maintenance-free, not requiring periodic charging. Dry ground enhancement materials are more sensitive to seasonal variability than cement-based materials.
详情
应用场景图片
![PH39099.jpg image]( "PH39099.png")
![PH39113.jpg image]( "PH39113.png")
![PH39106.jpg image]( "PH39106.png")
![PH39107.jpg image]( "PH39107.png")
![PH39115.jpg image]( "PH39115.png")
![PH39105.jpg image]( "PH39105.png")
![PH39103.jpg image]( "PH39103.png")
![PH39102.jpg image]( "PH39102.png")
![PH39114.jpg image]( "PH39114.png")
![PH39112.jpg image]( "PH39112.png")
![PH39101.jpg image]( "PH39101.png")
![PH39100.jpg image]( "PH39100.png")
![PH39108.jpg image]( "PH39108.png")
![PH39104.jpg image]( "PH39104.png")
![PH39109.jpg image]( "PH39109.png")
![PH39110.jpg image]( "PH39110.png")
![PH39116.jpg image]( "PH39116.png")
资源
视频
功能
- Lowers system resistance to ground
- Low-dust formulation
- Water not needed to install or perform
- Fast installation with no mixing or cure time required
- Can be installed in below-freezing temperatures
- Does not dissolve, decompose, or leach out with time
- Corrosion-resistant
- Sulfur content below 2% per IEC 62561-7
- Easy-to-handle 25 lb (11.3 kg) bags
- Requires only one person to install
- Resistance measurements can be taken immediately after installation
- Complies to the U.S. Environmental Protection Agency (EPA) Toxicity Characteristic Leaching Procedure (TCLP), EPA test method 1311
- Complies to EN 12457-2 Characterization of Waste Leaching Procedure, ENV 12506 and ENV 13370
技术参数
| 规格 | ||
| 参数 | 值 | 测试方法 |
| 电阻率 | 与水混合（重量比40%）时，电阻率< 15 Ω-cm 干燥测试电阻率lt; 25 Ω-cm | 根据ASTM G 57-06 采用4 电极测试法 |
| 硫含量 | < 2% | ISO 4689-3 |
| 溶出 | 小于所有化学物质的检测下限 | 根据EPA 1311，符合EN 12457-2 TCLP |
| 密度 | 993 kg/m3 | - |
| 每袋Quickfill 敷设沟长可预估 | |||
| 开槽宽度 | Quickfill 总厚度 | ||
| 10 cm | 13 cm | 15 cm | |
| 10 cm | 1.10 m | 0.88 m | 0.73 m |
| 15 cm | 0.73 m | 0.58 m | 0.49 m |
| 20 cm | 0.55 m | 0.43 m | 0.37 m |
| 25 cm | 0.43 m | 0.34 m | 0.27 m |
| 30 cm | 0.37 m | 0.27 m | 0.24 m |
| 接地棒周围回填所需Quickfill袋数可预估 | ||||||
| 直径 | 深度 | |||||
| 1.5 m | 1.8 m | 2.4 m | 3.0 m | 4.6 m | 6.1 m | |
| 10 cm | 1.1 | 1.3 | 1.8 | 2.2 | 3.3 | 4.4 |
| 15 cm | 2.5 | 3.0 | 3.9 | 4.9 | 7.4 | 9.8 |
| 20 cm | 4.4 | 5.2 | 7.0 | 8.7 | 13.0 | 17.4 |
| 25 cm | 6.8 | 8.2 | 10.9 | 13.6 | 20.3 | 27.1 |
| 30 cm | 9.8 | 11.7 | 15.6 | 19.5 | 29.3 | 39.0 |
安装手册 / 说明表
手册
- 警告
- 应仅根据 nVent 的产品说明书与培训材料安装并使用 nVent 的产品。可访问 www.nvent.com 获取说明书，或者向您的 nVent 客服代表索取。错误安装、使用不当、滥用或未能完全遵守 nVent 的说明与警告，可能会造成产品故障、财产损失、严重的人身伤害及死亡和/或使得保修服务无效。