Elexant 4010i Heat Trace Controller
Pase el ratón para ampliar la imagen o haga clic para agrandarla
Elexant 4010i Heat Trace Controller
nVent RAYCHEM Elexant 4010i Series is a range of compact, full-featured, touch screen based, single-point heat-tracing controllers, with ground fault protection. It provides control and monitoring for both freeze protection and process temperature maintenance. Available with either an electromechanical relay (EMR) for use in non hazardous areas, or solid-state relay (SSR) for use in non hazardous and Class I Div. 2 / Zone 2 hazardous locations. Capable of controlling up to 32A at 277 Vac.
Thanks for your submission. A customer service agent will be in touch soon to help you further.
Detalles
Recursos
Vídeo
Productos relacionados
![Placeholder image]()
![Placeholder image]()
![Placeholder image]()
![A10000861]()
![A10000861]()
![A10000863]()
Características
- Global approvals for CID2/Zone 2, ATEX Zone 2, IEC Ex Zone 2
- Ready to install: no need for custom panel design or field assembly
- Flexible control options: up to three directly- connected temperature sensors; also supports 4-20 mA inputs, allowing the use of external temperature sensor converters with thermocouples or other sensor types; also line sensing, ambient sensing, proportional ambient sensing control (PASC) and power limiting modes.
- Flexible monitoring options: ground fault, temperature, current and voltage to ensure system integrity
- Multiple communication ports: RS485 and Ethernet, readily connected to a distributed control system (DCS); support both the Modbus RTU and Modbus/TCP protocols; can network to a host PC running Windows®-based nVent RAYCHEM Supervisor software for central programming, status review, and alarm annunciation
- Reliable during long life: 10 year product warranty available
- Soft-Start, ground fault trip and high/low temperature limit features for equipment protection
- Multiple communication ports: RS485 and Ethernet, readily connected to a distributed control system (DCS)
- Support both the Modbus RTU and Modbus/TCP protocols
- Automatic network configuration with DHCP, or static IP configuration
- Firmware updates using USB thumb drive
- Multi-language interface: English, French, German, Spanish, Russian
- Two multi-purpose digital inputs for connection to external dry (voltage free) contact or DC voltage
Especificaciones
| Alarma de corriente | 0.1 – 100 A |
| Autociclo | 1 – 750 h |
| Clasificación de NEMA | 4X |
| Alarma por fallo de conexión a tierra | 10 – 500 mA |
| Ethernet | 10/100 Base-T |
| Tamaño máximo del cable de entrada de la fuente de alimentación | 16.8 mm² |
| Tamaño máximo del conductor de salida del cable calefactor | 16.8 mm² |
| Corriente máxima de control | 32A @ 40°C, de-Rated a 24A @ 50°C y más de-Rated a 16A @ 60°C. |
| Tamaño máximo del cable del terminal de tierra | 33 mm² |
| Alarma de voltaje | 80 – 300 V |
| Tensión máxima de control | 277 VAC nominal, 50/60Hz |
| Tamaño máximo del cable del terminal de tierra | #2 |
| Tamaño máximo del cable de entrada de la fuente de alimentación | #5 |
| Tamaño máximo del conductor de salida del cable calefactor | #5 |
| Rango de control de temperatura | −200 to 700 °C |
| Alarma de temperatura | −200 to 700 °C |
| Rango de control de temperatura | −328 to 1292 °F |
| Alarma de temperatura | −328 to 1292 °F |
| Temperatura de funcionamiento | −40 to 140 °F |
| Temperatura de funcionamiento | −40 to 60 °C |
| Humedad relativa | 0% a 90%, No Condensante |
| Comunicación | RS-485; Ethernet |
| Protocolo de comunicación | Modbus/TCP; Modbus RTU |
| Tipo de cable RS-485 | Un 2-Wire, par trenzado blindado |
Electric Heat Tracing
- Advertencia
- Los productos nVent deben instalarse y usarse solo como se indica en las hojas de instrucciones y materiales de capacitación del producto nVent. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. La instalación incorrecta, el mal uso, la aplicación incorrecta u otras fallas en el seguimiento completo de las instrucciones y advertencias de nVent pueden causar el mal funcionamiento del producto, daños a la propiedad, lesiones corporales graves y la muerte y/o anular la garantía.