Elexant 3500i Electronic Thermostat
Elexant 3500i Electronic Thermostat
The Raychem Elexant 3500i is a family of compact, full-featured, electronic thermostats for heat tracing control and monitoring in freeze protection and process temperature applications. Designed from a common hardware platform, the Elexant 3500i offers multiple variants with different features to allow the user flexibility in tailoring their heat tracing needs. Available features include: alarm relay, RS-485 and Bluetooth connections, load sensing, ground fault detection, automated heat trace system check, mobile application for wireless configuration, and more. The Elexant 3500i is suitable for hazardous and nonhazardous locations, and can be wall mounted or pipe mounted.
Thanks for your submission. A customer service agent will be in touch soon to help you further.
Detalles
Recursos
Vídeo
Productos relacionados
Características
- Multiple variants to allow flexibility for different heat-tracing requirements
- Options including dry contact alarm relay, RS-485 and Bluetooth communications, load current detection, ground fault detection and trip, as well as the ability to configure as a thermostat or limiter
- Power Connection and Thermostat in one kit
- 250k cycle endurance for long life
- Approved for up to 32A and 277Vac
- Suitable for extreme environments with an ambient operating temperature from -55°C to 60°C
Especificaciones
| Fondo | 3.6 in |
| Clasificación de NEMA | 4X |
| Anchura | 8.1 in |
| Tamaño máximo del cable de entrada de la fuente de alimentación | 16 mm² |
| Tamaño máximo del cable del terminal de tierra | 16 mm² |
| Tamaño máximo del conductor de salida del cable calefactor | 16 mm² |
| Corriente máxima de control | 32A @ 40°C, atenuado a 28A @ 50°C y 24A @ 60°C. Temperatura de funcionamiento ambiente |
| Fondo | 90 mm |
| Anchura | 206 mm |
| Tensión máxima de control | 277 VAC nominal, 50/60Hz |
| Tamaño máximo del cable de entrada de la fuente de alimentación | #5 |
| Tamaño máximo del cable del terminal de tierra | #5 |
| Tamaño máximo del conductor de salida del cable calefactor | #5 |
| Rango de control de temperatura | −55 to 550 °C |
| Temperatura de funcionamiento | −55 to 60 °C |
| Alarma de temperatura | −60 to 600 °C |
| Rango de control de temperatura | −67 to 1022 °F |
| Temperatura de funcionamiento | −67 to 140 °F |
| Alarma de temperatura | −76 to 1112 °F |
| Humedad relativa | 0% a 90%, No Condensante |
| Clasificación de IP | IP66 |
| Algoritmos de control | Encendido/apagado, siempre encendido, siempre apagado |
| Zona peligrosa | Sí |
| Barreras intrínsecamente seguras en entradas de RTD | Sí |
Especificación de diseño
Manual de instalación/Hoja de instrucciones
Referencia adicional

- Advertencia
- Los productos nVent deben instalarse y usarse solo como se indica en las hojas de instrucciones y materiales de capacitación del producto nVent. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. La instalación incorrecta, el mal uso, la aplicación incorrecta u otras fallas en el seguimiento completo de las instrucciones y advertencias de nVent pueden causar el mal funcionamiento del producto, daños a la propiedad, lesiones corporales graves y la muerte y/o anular la garantía.