Guide Rail, 4.4" PCB Type, Red
Survoler pour zoomer ou cliquer pour agrandir
Guide Rail, 4.4" PCB Type, Red
This plastic guide rail for 4.4" PCBs or drive units of the accessory type, forms a reliable interface between the subrack mechanics and the sub-assemblies. The guide rails can additionally be bolted to the horizontal rail or 1.5 mm thick plates for higher shock and vibration requirements. Guide rail can be optional equipped with a ESD clip, which ensures conductive contact between PCB and horizontal rail. Suitable for RatiopacPRO/-AIR, PropacPRO, CompacPRO and EuropacPRO.
Détails
Ressources
Fonctions
- Plastic guide rail, red
- Type "4.4" board height" (111.7 mm)
- Guide rails can be clipped into horizontal rails (Al extrusion) or into 1.5 mm thick plates
- The optional ESD clip for can be fitted into guide rails and ensures conductive contact between PCB and horizontal rail both on the solder side and on the component side.
- Storage temperature: from -40 °C ... 130 °C
Spécifications
Catalogue
Document avec schéma
- Avertissement
- Les produits nVent doivent être installés et utilisés uniquement comme indiqué dans les feuilles d'instructions et les documents de formation de nVent. Les feuilles d'instructions sont disponibles sur www.nvent.com et auprès de votre représentant du service client nVent. Une installation incorrecte, une mauvaise utilisation, une mauvaise application ou tout autre défaut de respect total des instructions et des avertissements de nVent peut entraîner une défaillance du produit, des dommages matériels, des blessures corporelles graves et la mort et/ou annuler votre garantie.